Toner Cable DCWRGST-* Self Terminating Wall Tap User Manual
Dcwrgst, Self terminating wall tap
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: 215-675-2053 Fax: 215-675-7543
l
The DCWRGST series wall taps from Toner feature a revolutionary newly designed
self terminating F port.
The self terminating F port on the tap port of the tap provides a self terminating 75
Ω
load when the mating F connector is removed.
The F port uses a unique (patent pending) F port design that has a sliding dielec-
tric, which closes an internal switch connecting a 75
Ω load to the tap. This provides
termination and maintains proper match to ensure accurate system performance.
The DCWRGST is a standard 90° type wall tap, typically mounted on a wall plate
for flush mounting, and has all the same features as our standard DCWRG wall
taps.
The DCWRGST is ideally suited to situations where the connection is only used
occasionally, or the cable is removed often, such as in schools or businesses, or
any time television is shared amongst multiple outlets.
By using the DCWRGST in these applications, it is no longer necessary for anyone
to remember to install a terminator when they disconnect the jumper cable from the
wall plate.
Port self terminates when
connector is removed
DCWRGST
Self Terminating Wall Tap