Toner Cable LSx 2150A (LS 16 2150A) Active L-Band (950-2150MHz) Power Divider-Splitters - Manual

Telephone: Nationwide: Fax: E-mail: Internet:
06/01
QUINTECH SRM
2150 and SRF
1000
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
SRM 22150
L- BAND (950-2150 MH Z ) M ODULAR
M ATRIX S WITCHING S YSTEM
US PATENTS
4,935,709 & 5,481,073
Q-Switch ® SRM 2150/16x16
G ENERAL D ESCRIPTION :
The base SRM 2150/(16X16) matrix switch includes front
panel keypad controller, LCD display, RS-232 interface
and all of the splitter, amplifier, switching, control and PSU
modules required to switch any one of 16 broadband
coaxial inputs into any one or more of the 16 outputs. The
operation can be configured in software converting a
(16X16) to 4 (8X8), or 8 (4X4). The system can be
expanded to (128X128), with local and/or remote control,
monitoring and polling functions as required.
P R O D U C T S P E C I F I C A T I O N S :
Input/Output Ports: 16X16 up to 128x128
Operating Frequency Range: 950-2150 MHz
Impedance (Input/Output): 75
Ω
VSWR (Input/Output): 2.0:1
Nominal Gain: 0 ± 2.0 dB max
Gain Flatness: ± 3 dB max.
Isolation Input/Input: 60 dB typ. (45 dB min.)
Isolation Output/Output: 60 dB typ. (45 dB min.)
Isolation Input/Output: 55 dB typ. (40 dB min.)
RF Connectors (Input & Output): Type "F", 75 Ω
Power Required: 100/240 VAC, 50/60 Hz
(
Specify 120 or 220 VAC )
Dual AC inputs and dual
internal PSU’s provided
for redundancy.
Mechanical: RU (5.25" H x 19.0" W x 20.0" D)
Control:
Local: Front panel Keypad
Remote: RS-232
SRF 1000
U LTRA B ROADBAND
RF S WITCH
US PATENTS
4,935,709 & 5,481,073
Q-Switch ® SRF 1000/1x8
G ENERAL D ESCRIPTION :
Quintech’s SRF series switches offers a high perfor-
mance yet cost effective solution to the growing need
for switching in an environment of rapidly expanding
channel capacity and frequency spectrum. Equally
suitable for cable, RF and Data applications, SRF
switches are bi-directional and easily configured for
both simple and complex networks. Signal routing can
be controlled directly by 12 VDC applied via D-9 con-
nector. Custom integrated subsystems with any cus-
tomer specified input/output configuration are avail-
able.
P R O D U C T S P E C I F I C A T I O N S :
Insertion Loss
@ DC-550 MHz 0.3 dB
@ DC-850 MHz 0.5 dB
@ DC-1450 MHz 0.8 dB
@ DC-1750 MHz 1.8 dB
@ DC-2300 MHz 2.0 dB
Isolation
@ DC-550 MHz 60 dB
@ DC-850 MHz 50 dB
@ DC-1450 MHz 40 dB
@ DC-1750 MHz 35 dB
@ DC-2300 MHz 30 dB
Return Loss
@ DC-550 MHz 17 dB
@ DC-850MHz 14 dB
@ DC-1450 MHz 12 dB
@ DC-1750 MHz 11 dB
@ DC-2300 MHz 10 dB
Connectors: Type "F", 75 Ω
Control: 12 VDC via D-9 (male)
Switch Life: 10,000,000 operations @ 50 cycles/hour
L-Band
Matrix Switch SRM 2150
Routing Switch SRF 1000
Power Supplies RPS Series
Dividers/Splitters LSx 2150A