No. 3 bi-seal – Toner Cable No. 10 Plyseal Tape User Manual
Page 2
©Toner Cable Equipment, Inc.
Specifications Subject To Change Without Notice.
Telephone:
Nationwide:
Fax:
E-mail:
Internet:
Bishop No
.10 Pl
yseal & No
.3 Bi-Seal T
ape
215-675-2053
800-523-5947
215-675-7543
http://www.tonercable.com
NO. 3 BI-SEAL
®
High Voltage Tape
For Insulating, Terminating,
Sealing and Splicing
Self-amalgamating . . . fuses into solid mass
Superior corona and ozone resistance
Long storage life . . . (5 years)
Excellent moisture, corrosion and chemical resis-
tance
High dielectric strength, low-power factor, low
dielectric constant
Superior aging and weathering
Unexcelled for cold weather applications
Exceptional temperature characteristics
Chemically cross-linked
Thermal Emergency Rating 130°C (100 hr/yr)
Description: This cross-linked polyethylene-based
tape exhibits excellent electrical, chemical, mechani-
cal and thermal properties, and is easier to apply
than most insulating tapes.
Bi-Seal conforms perfectly to the most complex
shape or contour. Bi-Seal can be used with the fol-
lowing insulations: oil base rubber, butyl rubber,
EPR, thermoplastic and thermosetting polyethylene,
PVC.
Recommended Uses: For insulating joints and ter-
minations on all types of communication cable. (not
to be used on paper insulated cable.) Insulating
high frequency electronic circuits. Sealing service
entrance connections and corrosion-resistant conduit
couplings.
Packaging: Each roll is labeled, polyethylene
wrapped, and boxed.
PROPERTY
VALUE
UNIT
METHOD
Physical
Color
Black
--
--
Thickness
0.030
inches
MIL-I-3825B
0.762
mm
Elongation
1000
%
ASTM D-1373
Tensile Strength
300
Psi
ASTM D-1373
Operating Temp.
Maximum
95
°C
*BTM-608
Minimum
-55
°C
MIL-I-3825B
Fusion
1 1/2
Turns
ASTM D-1373
Chemical
Water Absorption
0.020
%
ASTM D-570
Ozone Resistance (1 month) 0.03%
MIL-I-3825B
No Effect
Corrosion
None
Visual
MIL-I-3825B
Electrical
Dielectric Constant 2.6
--
ASTM D-150(60Hz)
Power Factor
0.004
--
ASTM D-150(60Hz)
Dielectric Strength 725
Volts/mil ASTM D-149
Volume Resistivity >10
15
Ohm/cm ASTM D-257
No. 3 Bi-Seal
®
®
High Voltage Tape UPC#08052
ROLL SIZE
ROLLS PER CASE
WEIGHT PER CASE
1 in x 30 ft
80
45 lbs
25.4 mm x 9.1 m
21 kgs