Velleman CAMIP5N1 User manual - Manual (Page 7)

CAMIP5N1
V. 03 – 10/06/2013 7 ©Velleman nv
Option Use
Mode Select a refresh rate from the list.
Fps Select a frame per second setting from the list.
Brightness Set the brightness with the and buttons.
Contrast Set the contrast with the and buttons.
Preset – Set - Go
You can set a pre-defined location with the Preset function.

To set a location:
Select a number from the list and click Set.
The system will save the preset.
 To use a location you have preset:
Select it from the list and click Go.
Default all Reset all settings to their default values.
Flip Select the Flip checkbox to show the image shown upside down.
Mirror Select the Mirror checkbox to mirror the image.
 Click an arrow to move the camera accordingly.
 Click and hold to move faster.
 Click C to start auto-scanning the entire area.
Start Auto tilt (vertical). Press to stop.
Start Auto pan (horizontal). Press to stop.
Switch IR LEDs on (for night vision).
Switch IR LEDs off.
Click to start live video.
Click to stop live video.
Enable or mute the microphone.
Enable or mute the sound.
Start manual recording.
Click to take a snapshot of the current camera view.
Set the camera view to full screen.
10. Advanced settings
10.1 IP Camera Tool
You can access various options in the IP Camera Tool:
1. Double-click the IP Camera Tool on your desktop.
The tool will detect the camera connected to tour computer.
2. Right-click the camera. The options are: