5 users settings, Define users, permissions and passwords, Set alarm record path – Velleman CAMIP5N1 User manual User Manual
Page 10: Notes when using windows vista, 6 multi-device settings, Manually add extra cameras, 7 basic network settings
CAMIP5N1
V. 03 – 10/06/2013
10
©Velleman nv
11.5 Users Settings
Define users, permissions and passwords
Up to 8 users can be configured.
Enter a user name, a password and select a group (Visitor, Operator or Administrator).
This is also the location to change the default administrator‟s login name and set a password for the
administrator.
Set alarm record path
Use the Browse button to change the default alarm record path.
Notes when using Windows Vista:
Remember to add the IP address of the camera to the „Trusted sites‟.
The system does not allow setting the Windows system root directory as alarm record path.
11.6 Multi-Device Settings
Manually add extra cameras
To add a camera, click on a blue link and enter an alias, host address, HTTP port, user and password.
11.7 Basic Network Settings