Velleman HAA2801 - Manual (Page 4)

INTRODUCTION
The HAA2801 is a self-contained access controller. It has been designed mainly as the decoder
unit working together with the HAA2866 and HAA2890 keypads to make up a split-decoded keypad
system.
In split-decoded operation the system provides full Tri-Tech features of accepting EM Card, PIN/Code
and RF Remote Control. This unique design philosophy makes the system to provide high level of
security in preventing sabotage far ahead of the traditional stand alone keypad systems.
Note: This manual describes both HAA2800 and HAA2801, but only HAA2801 is supported.
Please disregard all information regarding HAA2800 (stand-alone mode without keypad, RF remote
controller use).
HAA2801 is the simplified version. It is solely a full feature decoder of the HAA28xx series keypad in
Split-decoded operation.
The HAA2801 has three output relays and a built-in door chime. It is an ideal device for Door Strike,
Alarm Arm-disarm control and actuation of Automatic Operator, such as garage door opener.
The keypad system with the HAA2801 decoder in Split-decoded operation offers full features
performance even the keypad is just a simplified version. Maximum three keypads can be connected
in parallel to the decoder unit with one of them setting in master mode and the other two setting in
slave mode. Each keypad can be programmed with its own PINs and Cards. The slave keypads take
the features and the functions programmed in the master keypad to operate the system. The decoder
interprets the data and operates the desired functions faithfully.
For more info concerning this product and the latest version of this manual, please visit our
website www.velleman.eu. The information in this manual is subject to change without prior
notice.
FEATURES
HAA2800 – Full Feature Decoder + RF Remote Control
HAA2801 – Full Feature Decoder
I) HAA2800 & HAA2801
• A Decoder for The HAA28xx Series Keypads in Split-decoded Operation
• Decodes The Data of EM Cards, PINs / Codes & Functions Faithfully from Keypads
• Provides Full Features in Split-Decoded Mode for Any Keypad in The HAA28xx Series
• Simple Three Wires Connection to Keypads For Data Communication, (+), (-) & Data I/O
• Easily to Set Up Link Up Code with The Keypads And The Decoder
• Three Independently Controlled Output Relays
• Built-in Door Chime
• Built-in Alarm for Tamper, Door Forced Open and Door Opening in Split-Decoder Mode
• Built-in Current Limited (750mA) Power Source for The Keypads to Prevent Sabotage of Short
Circuit from Outside
II) HAA2800 Only
• Provides The Tri-Tech Features of RF Remote Control, Card and PIN/Code Reading in One
System
• 24 bits Self-learning Codes (over 1 million codes) for The RF Remote Control Keys
• Accepts 40 RF Remote Control Keys Maximum
• 4 RF Remote Control Channels for Stand Alone or Split-decoded Operation
• Remote Control Key Controls Output 1, 2, 3 & Door Chime
4
User manual only available in English. Mode d’emploi disponible uniquement en anglais.