Velleman HAA2801 - Manual (Page 28)

EXAMPLES – PROGRAMMING AND OPERATION
1) Example 1 -- EM Card Only :
i) Programming :
10 1 001 #
(a) (b) (c) (d) (e)
(a) The card is programmed for operating of the Output 1
(b) The operation is EM Card only
(c) Take ID number 001 in Group 1 to store the card, which is one of the IDs in 000-999
(d) Put the card close to the reader to read it, one beep confirms the reading
(e) Press # to store the “Card” into memory, two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
(a)
(a)
2) Example 2 -- Private User PIN Only :
i) Programming :
20 2 001 1234 #
(a) (b) (c) (d) (e)
(a) The Private User PIN is programmed for operating of the Output 2
(b) The operation is Private User PIN only
(c) Take ID number 001 in Group 2 to store the Private User PIN, which is one of the IDs in 001-100
(d) Put Private User PIN “1 2 3 4” into the storage location
(e) Press # to confirm and store the “Private User PIN” into memory, two-beep confirms a valid entry
ii)Operation : (while the system is back to operation mode)
1234 #
(a) (b)
(a) Key in the Private User PIN “1 2 3 4”
(b) Confirm it with the # key. Output 2 activates
3) Example 3 -- EM Card + Secondary User PIN :
i) Programming :
10 3 002 24680 #
(a) (b) (c) (d) (e) (f )
(a) The card is programmed for operating of the Output 1
(b) The operation is EM Card + Secondary User PIN
(c) Take the ID number 002 in Group 1 to store the Card & PIN, which is one of the IDs in 000-999
(d) Put the card close to the reader. One beep confirms the reading
(e) Put Secondary User PIN “2 4 6 8 0” into the storage location
(f ) Press # to store the “Card + Secondary User PIN” into memory, two-beep confirms a valid entry
ii) Operation : (while the system is back to operation mode)
24680 #
(a) (b) (c)
(a)
(b)
(c)
Read Card
Read Card
Read Card
Read Card
28
Put the EM card close to the reader. Two-beep confirms the card is read and the Output 1
activates
Put the EM card close to the reader. Two-beep confirms the reading and 30 seconds waiting
time is given for the entry of the User PIN, the Amber LED keeps flashing
Key in the Secondary User PIN “2 4 6 8 0”
Confirm it with the # key. Output 1 activates