Trek PD05034 High-Voltage Power Amplifier - Manual

The Model PD05034 is a DC-stable, high-voltage power
amplifier used in industrial and research applications
. It
features an all-solid-state design for high slew rate, wide
bandwidth and low-noise operation. The four-quadrant, active
output stage sinks or sources current into reactive or resistive
loads throughout the output voltage range.
This type of output is
essential to achieve an accurate output response and high
slew rate demanded by a variety of loads such as highly
capacitive or reactive loads. It is configured as a non-inverting
amplifier.
Trek Model PD05034
High-Voltage Power Amplifier
Key Specifications
! Output Voltage Range:
! Output Current Range: peak current capability for 50 µs
! Slew Rate: Greater than 1000 V/
0 to ±7.5 kV DC or peak AC
0 to ±50 mA DC with a 0 to ±160 mA
µs
Large Signal Bandwidth (1% distortion): DC to greater than 15 kHz
DC Voltage Gain: Fixed at 1000 V/V
!
!
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804
Typical Applications Include
! Dielectric charge material characterization
Polymer and ceramic corona charging
Piezoelectric driving and control
!
!
Features and Benefits
!
!
!
!
!
!
! Four-quadrant output for driving capacitive loads
Closed loop system for high accuracy
Short-circuit protected for equipment protection
All solid-state design for maintenance free operation
DC-stable for programmable supply applications
Low output noise for ultra-accurate outputs
! compliant
NIST-traceable Certificate of Calibration provided with each unit