Trek 609B-3 High-Voltage Power Amplifier - Manual (Page 2)

Mechanical
Dimensions 149 mm H x 434 mm W x 370 mm D
(5.9” H x 17” W x 14.3” D)
Weight 11 kg (24 lb)
External Control
Connector Connections from customer supplied remote
switching devices can turn ON and OFF the high-
voltage output and/or the AC power to the unit
using a multi-pin connector on the rear of the unit
Operating Conditions
Temperature 0°C to 40°C (32°F to 104°F)
Relative Humidity To 85%, noncondensing
Altitude To 2000 meters (6561.68 ft.)
Electrical
Line Voltage Factory Set for one of three ranges:
100 V AC, 115 V AC or 230 V AC at 48 to 63 Hz
(specify when ordering)
Ordering Information
High Voltage Power
Amplifier
100 V AC PN: 609B-3-F-CE
115 V AC PN: 609B-3-G-CE
230 V AC PN: 609B-3-K-CE
Supplied Accessories
Operators’ Manual PN: 23353
HV Output Cable PN: 43406
Input Mating
Connector PN: B1023 connector, B1042 hood and B1062
socket
Remote Input
Connector PN: B1024 connector, B1042 hood and B1064
pin
Line Cord (100 V and
115 V operation) PN: N5002
Line Cord 230 V AC Contact factory
Optional Accessories
HV Output Cable PN: 43421 (5m); 43422 (10 m); 43423 (20 m)
19” Rack Mount Kit Model 607RA (with EIA hole spacing)
19” Rack Mount Kit Model 607RAJ (with JIS hole spacing)
Copyright ã 2013 TREK, INC. All specifications are subject to change. 1336/JRB
Model 609B-3 Specifications
Performance
Output Voltage
Range 0 to ±10 kV DC or peak AC
Output Current
Range 0 to ±2 mA DC or peak AC
Input Voltage Range 0 to ±10 V DC or peak AC
Input Impedance
Noninverting 10 kW, nominal
Inverting 20 kW, nominal
DC Voltage Gain 1000 V/V
DC Voltage Gain
Accuracy Better than 0.1% of full scale
DC Offset Voltage Less than ±2 V
Output Noise Less than 50 mV rms*
Slew Rate
(10% to 90%, typical) Greater than 30 V/µs
Settling Time Less than 700 µs for a 0-10 kV step
Large Signal
Bandwidth (1%
distortion) DC to greater 400 Hz
Small Signal
Bandwidth (-3dB) DC to greater than 10 kHz
Stability
Drift with Time Less than 50 ppm/hr, noncumulative
Drift with Temp Less than 200 ppm/°C
Voltage Monitor
Ratio 1/1000th of the high-voltage output signal
DC Accuracy Better than 0.1% of full scale
DC Offset Voltage Less than ±5 mV
Output Noise Less than 5 mV rms*
Output Impedance 47 W
Features
High-Voltage Switch Three-position switch to select ON, OFF or
REMOTE
Power Switch Three-position switch to select ON, OFF or
REMOTE
Amplifier Input
Programming A noninverting, inverting or differential amplifier
input signal can be wired into the AMP INPUT
receptacle on the rear of the unit.
*Measured using the true rms feature of the HP Model 34401A digital multimeter
Measurement and Power Solutions TM