Features performance general, Model 930 accessories (supplied) – Trek 930 Benchtop Ionizer User Manual
Page 2
Model 10/40A Specifications
Model 930 Specifications
Features
Performance
General
Automatic, High Speed Static Charge
Elimination
Generates an equivalent amount of
plus or minus ions to completely
eliminate electrostatic in less than 1
second at a distance of 30cm or less
from the center of the air source.
Built-In Self Correction
Automatic ion balancing produces a
work surface voltage of less than
Variable Air Input
A single-step air flow adjustment
adjusts to a maximum of 4.4
Front Panel Indicators
5 LEDs indicate levels of plus and
minus ion balance. Additional LEDs
indicate power on, operation in
progress, system failure and fan
failure.
Reusable Air Filter
Washable polyurethane foam, 13PPI.
±5V
within the appropriate range without
intervention by the operator.
Power Supply Voltage (from adapter)
Ion Balance
24 VDC ±10%, 1A maximum
0V to less than ±5 V (Automatic ion
balance method)
Operating Conditions
Discharge Time
Temperature: 0 to 50°C
1 second max. (At a distance of 300
Relative Humidity: 10 to 85% (with
mm, highest air capacity)
no icing or condensation)
Ozone Generation
Less than 0.02 ppm
Installation Distance
* DASHIBI 1003AH ozone monitor
50 mm to 900 mm (Recommended
(ultravoilet absorption method) is
installation distance: 300 mm,
used for the measurement.
(work surface to air outlet).
Air Volume
3
Max. 4.4 m /min (without filter
Power Switch
attached)
3
Switch on Rear Panel.
m /min
Noise Volume
(without the filter attached).
41 dB-A (lowest air capacity) to 59
Emitter Cleaner
dB-A (highest air capacity) (with filter
Manual type nylon brush is
attached)
provided
Wind Speed (measured at the central
Dimensions (mm)
position of the air flow)
150 W x 236 H x 94 D (housing
only)
Distance
Highest
Lowest
(m/sec)
(m/sec)
Weight
Dedicated AC/DC Adapter
30cm
1.9
0.6
Approx.1.9g (stand part
Input Voltage
60cm
1.7
0.5
included)
95 to 265 V AC, 47 to 63 Hz
90cm
1.4
0.4
Output Voltage
120cm
1.0
0.4
24 VDC ±5%, 1.5 A MIN
Dimensions
Model 930 Accessories (supplied)
Operator’s Manual
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • [email protected]
716-438-7555 • 716-201-1804