Milton CAT 430E IT - Manual (Page 19)

19
Backhoe Dimensions and Performance
Standard Stick E-Stick Retracted E-Stick Extended
(14) Digging depth, SAE (max.) 4698 mm 15 ft 5 in 4809 mm 15 ft 9 in 5951 mm 19 ft 6 in
(15) Digging depth, 610 mm (2 ft) flat bottom 4672 mm 15 ft 4 in 4783 mm 15 ft 8 in 5925 mm 19 ft 5 in
Reach from rear axle centerline at ground line 7152 mm 23 ft 6 in 7257 mm 23 ft 10 in 8350 mm 27 ft 5 in
(16) Reach from swing pivot at ground line 6049 mm 19 ft 10 in 6154 mm 20 ft 2 in 7247 mm 23 ft 9 in
Maximum operating height 6009 mm 19 ft 9 in 6096 mm 20 ft 0 in 6990 mm 22 ft 11 in
Loading height 3956 mm 13 ft 0 in 3912 mm 12 ft 10 in 4520 mm 14 ft 10 in
(17) Loading reach 1774 mm 5 ft 10 in 1948 mm 6 ft 5 in 2916 mm 9 ft 7 in
Swing arc 180° 180° 180°
Bucket rotation 205° 205° 205°
(18) Stabilizer spread, operating position (center) 3310 mm 10 ft 10 in 3310 mm 10 ft 10 in 3310 mm 10 ft 10 in
(19) Stabilizer spread, operating position (outside) 3770 mm 12 ft 4 in 3770 mm 12 ft 4 in 3770 mm 12 ft 4 in
Stabilizer spread, transport position 2322 mm 7 ft 7 in 2322 mm 7 ft 7 in 2322 mm 7 ft 7 in
Bucket dig force 70.7 kN 15,892 lb 69.7 kN 15,680 lb 69.7 kN 15,680 lb
Stick dig force 44.2 kN 9,940 lb 43.3 kN 9,730 lb 32.0 kN 7,197 lb
Dimensions and performance specifi cations shown are for machines equipped with 12.5/80-18 SGL front tires, 19.5L-24 IT525 rear tires, ROPS canopy, standard stick with
610 mm (24 inch) standard duty bucket, and 0.96 m 3 (1.25 yd 3 ) loader bucket and standard equipment unless otherwise specifi ed.
Single Tilt Loader
IT Loader