Milton CAT 430E IT - Manual (Page 16)

16
430E/430E IT Specifications
Machine Dimensions
IT Loader with Quick Coupler
Multi Purpose
(0.96 m 3 /1.25 yd 3 )
Multi Purpose
(1.03 m 3 /1.35 yd 3 )
mm ft/in mm ft/in
(1) Overall length (loader on ground) 7372 24 ft 2 in 7372 24 ft 2 in
Overall transport length 7349 24 ft 1 in 7349 24 ft 1 in
(2) Overall transport height (standard stick) 3577 11 ft 9 in 3577 11 ft 9 in
Overall transport height (extendible stick) 3631 11 ft 11 in 3631 11 ft 11 in
Overall width 2322 7 ft 7 in 2322 7 ft 7 in
(3) Height to top of cab/canopy 2819 9 ft 3 in 2819 9 ft 3 in
(4) Height to top of exhaust stack 2754 9 ft 0 in 2754 9 ft 0 in
Height to loader hinge pin (transport) 359 1 ft 2 in 359 1 ft 2 in
Ground clearance (minimum) 320 1 ft 1 in 320 1 ft 1 in
(5) Rear axle centerline to front grill 2705 8 ft 10 in 2705 8 ft 10 in
Front wheel tread gauge 1880 6 ft 2 in 1880 6 ft 2 in
Rear wheel tread gauge 1727 5 ft 8 in 1727 5 ft 8 in
(6) Wheelbase 4WD 2200 7 ft 3 in 2200 7 ft 3 in
Dimensions and performance specifi cations shown are for machines equipped with 12.5/80-18 SGL front tires, 19.5L-24 IT525 rear tires, ROPS canopy, standard stick with
610 mm (24 inch) standard duty bucket, and 0.96 m 3 (1.25 yd 3 ) loader bucket and standard equipment unless otherwise specifi ed.
Single Tilt Loader
IT Loader