Battery charger – Milton CAT D100-6_S 100 kW 10A Battery Charger User Manual
Page 2

BATTERY CHARGER
OPTIONS
Amps
Volts
Hz
Volts
110-120
208-240
Width
Depth
Height
Weight
195 mm
165 mm
318 mm
10.4 kg
(7.66")
(6.50")
(12.50")
(23 lb)
PBC10NU
Output Input
10
12
60
Feature code
NFPA 110 alarm package as follows:
·
AC on
Green led (indication)
·
AC fail
Red led and form C contact (2A)
·
Float mode
LED
·
Fast charge
LED
·
Temp comp active
LED
·
Low battery volts
Red led and Form C contact
·
High Battery Volts
Red led and Form C contact
·
Charger fail
Red led and Form C contact
·
Battery fault
Red led and Form C contact
- Battery disconnected
- Battery polarity reversed
- Mismatched charger battery voltage
- Open or high resistance charger to battery connection
- Open battery cell or excessive internal resistance
Information contained in this publication may be considered confidential. Discretion is recommended when distributing.
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate
and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
LEHE0143-00 (04-10) ©2010 Caterpillar
All Rights Reserved.
Printed in U.S.A.