Milton CAT D100-6_S 100 kW 10A Battery Charger User Manual
Ul 10 amp battery charger, Battery charger
BATTERY CHARGER
LEHE0143-00
UL 10 AMP
BATTERY CHARGER
60 Hz only
This battery charger offers accurate, automatic charging
of lead-acid and nickel cadmium batteries. The output
voltage automatically adjusts to changing input, load,
battery and ambient conditions. This prevents battery
over-charging and consequent loss of battery electrolyte.
Standard features include AC line compensation,
precision voltage regulation, current limiting, automatic 2-
rate charging, voltmeter and ammeter, temperature
compensation and UL Listing.
The user interface is easy to understand with digital
metering, NFPA 110 alarms and a battery fault alarm.
Image Shown may not Reflect Actual Package
SPECIFICATION
FEATURES
Input Supply
110-120 V
·
Electronically current limited at 105% of rated output
208-240 V
·
Alarm system
AC and DC Fuses
(2 input and 2 output)
·
Digital Display
Output voltage
12V
·
Lightning and voltage transient protection
Frequency
60 Hz
·
Protection of connected equipment against load
Operating temperature
-20°C ( -4°F)
dump protection
to +60°C (140°F)
·
Constant voltage, current limited, 4-rate automatic
Housing constructed of rustproof anodized
equalization
aluminum.
·
IP 20 housing
·
AC isolated from DC
STANDARDS
·
Temperature Compensation
·
C-UL listed to UL 1236
- On board temperature sensor with remote port
·
NFPA 70, NFPA 110
·
Auto AC line compensation
·
CSA 22.2 No 107 certified
·
Output regulated by sensed battery voltage
·
UL 1564
·
CE DOC to EN 60335
·
IBC Seismic Certification