Milton CAT D125-6 125 kW Spec Sheet - Manual

LEHE5521-01
STANDBY 125-150 kW
PRIME 114-135 kW
60 Hz
FEATURES
GENERATOR SET
● Complete system designed and built at ISO 9001
certified facilities
● Factory tested to design specifications at full
load conditions
ENGINE
● Governor, electronic
● Electrical system, 12 VDC
● Cartridge type filters
● Battery rack and cables
● Coolant and lube drains piped to edge of base
GENERATOR
● Insulation system, class H
● Drip proof generator air intake (NEMA 2, IP23)
● Electrical design in accordance with BS5000
Part 99, EN61000-6, IEC60034-1, NEMA MG-1.33
CONTROL SYSTEM
● EMCP 3.1 digital control panel
● Vibration isolated NEMA 1 enclosure with
lockable hinged door
● DC and AC wiring harnesses
MOUNTING ARRANGEMENT
● Heavy-duty fabricated steel base with lifting points
● Anti-vibration pads to ensure vibration isolation
● Complete OSHA guarding
● Stub-up pipe ready for connection to silencer
pipework
● Flexible fuel lines to base with NPT connections
COOLING SYSTEM
● Radiator and cooling fan complete with
protective guards
● Standard ambient temperatures up to 50° C
(122° F)
CIRCUIT BREAKER
● UL/CSA listed
● 3-pole with solid neutral
● NEMA 1 steel enclosure, vibration isolated
● Electrical stub-up area directly below circuit
breaker
AUTOMATIC VOLTAGE REGULATOR
● Voltage within ± 0.5% 3-phase at steady state
from no load to full load
● Provides fast recovery from transient load changes
EQUIPMENT FINISH
● All electroplated hardware
● Anticorrosive paint protection
● High gloss polyurethane paint for durability
and scuff resistance
QUALITY STANDARDS
● BS4999, BS5000, BS5514, EN61000-6, IEC60034,
NEMA MG-1.33, NFPA 110 (with optional
equipment)
DOCUMENTATION
● Operation and maintenance manuals provided
● Wiring diagrams included
WARRANTY
● All equipment carries full manufacturer’s
warranty.
D I E S E L G E N E R A T O R S E T
Standby Prime
Model
kW (kVA) kW (kVA)
D125-6 125 (156.3) 114 (142.5)
D150-8 150 (187.5) 135 (168.8)
Tier 3 EPA Approved, Emissions Certified
Picture shown may not
reflect actual package