Milton CAT C15 Factory Integral Fuel Tank Base - Manual

FEATURES DESCRIPTION
A T T A C H M E N T S
C15 INTEGRAL
FUEL TANK BASE
Diesel Generator Set
400 – 550 kVA 50 Hz
350 – 550 kW 60 Hz
● UL 142 listed
● Designed and built to comply with
NFPA 30, 37, 110
● Direct reading fuel level gauge
● Primary tank leak detection switch in
containment basin
● Fuel fill – 101.6 mm (4 in), lockable cap
● Supply and return ports equipped with dip tubes
● Additional capacity at top to contain spillage
● Additional capacity at bottom to (weather
protective and sound sediment pickup)
● Internally baffled to separate supply and return
fuel ports
● Primary tank atmospheric vent – 50.8 mm (2 in)
NPT with cap and screen
● Interior tank surfaces coated with a solvent-based,
thin-file rust preventative
● Welded steel containment basin (minimum of
110% of primary tank capacity)
● Tank designed to contain coolant and engine
oil spills
● High performance, gloss black, alkyd acrylic
enamel exterior paint over epoxy based primer
● Heavy 1 ⁄
4
" steel construction primary (inner) tank
and side channels
● Integral diesel fuel tank is incorporated into the
generator set base frame.
● Robust base design includes linear vibration
isolators between tank base and engine-
generator.
● Emergency vent on primary and secondary tanks
are sized in accordance with NFPA 30.
● Dual wall.
● Primary and secondary tanks are leak tested
at 20.7 kPa (3 psi) minimum.
● Compatible with enclosures (weather protective
and sound attenuated).
OPTIONS
● Manual fuel transfer pump
● Auto fuel transfer system
– Below grade main tank (pumped supply/
gravity return)
– Elevated main tank (gravity supply)
– Pumped supply from free standing
● Low fuel level switch (alarm/shutdown)
LEHE5511-00