Milton CAT C18 Factory Integrated Fuel Tank Base - Manual (Page 2)

Information contained in this publication may be considered confidential. www.cat-ElectricPower.com
Discretion is recommended when distributing.
Materials and specifications are subject to change without notice. © 2005 Caterpillar
LEHE5463-00 (11-05) CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product All Rights Reserved.
identity used herein, are trademarks of Caterpillar and may not be used without permission. Printed in U.S.A.
A T T A C H M E N T S
Liter Gallon Type
Height “A” Length “B” Weight
mm in mm in lb
1350 356 Integral 550 21.7 4110 161.8 3,420
C18 FUEL TANK BASE (INTEGRAL) USEABLE CAPACITIES
Fuel Tank Dimensions
Liter Gallon Type
Height “A” Length “B” Weight
mm in mm in lb
1140 300 Integral 420 16.5 4250 167.3 3,294
1520 400 Integral 505 19.9 4250 167.3 3,546
1900 500 Integral 600 23.6 4250 167.3 3,890
The heights listed above do not include lumber used for skidding during manufacturing and shipping.
Tanks with RH/LH stub-up include stub-up area directly below the circuit breaker or power terminal strips.
Dimensions do not include weather-protective enclosure exhaust system.
Weight is for tank only. Does not include additions or removals required by price list.
UL 142 – Dual wall sub-base tanks are UL listed (File MH17470) and constructed
in accordance with Underwriters Laboratories Standard UL 142 “Steel Aboveground
Tanks for Flammable and Combustible Liquids.”
NFPA – Fuel tanks are built in accordance with the following NFPA Codes:
NFPA 30 – Flammable and Combustible Liquids Code
NFPA 37 – Standard for Installation and Use of Stationary Combustible Engine
NFPA 110 – Standard for Emergency and Standby Power Systems
Single Wall – Width 1461 mm (57.5 in)
Dual Wall – Width 1900 mm (74.8 in)