Milton CAT 336D L - Manual (Page 11)

Tool Control System. This system offers
the most flexibility and versatility of the
auxiliary options offered. This system
is available in two configurations, as a
stand-alone system or with a medium
pressure circuit and third pump. This
system is capable of running either one-
way or two-way tools and one-pump or
two pump tools. The addition of the
medium pressure circuit allows use of
tools that rotate such as grapples, shears
or multi-processors. Up to 10 different
tool settings can be pre-programmed
and selected through the monitor.
Auxiliary Hydraulic Options. There are
four different options that can be factory
installed to meet the various demands
for hydra-mechanical tools.
• Single-Function
• Double-Function
• Tool Control System without
Medium Pressure
• Tool Control System with Medium
Pressure
Single-Function Auxiliary Hydraulics.
This circuit utilizes one-way flow with
two pumps and can run tools such as
hammers and vibratory plate compactors.
Double-Function Auxiliary Hydraulics.
This circuit utilizes two-way flow and
one pump and is capable of running
tools such as a thumb, tilt-bucket or
non-rotating grapples or shears.
Hydraulic Kits. Field installed hydraulic
kits are available that are identical to
the factory installed version in both
component and functionality.
The flexibility of the base hydraulic
design allows for upgradeability to
any auxiliary hydraulic option.
Machine Security. An optional Machine
Security System is available from the
factory on the 336D L. This system
controls when the machine can be
operated and utilizes specific keys
to prevent unauthorized machine use,
a significant theft deterrent.
Product Link. Product Link 321 is now
standard on the 336D L. The optional
levels of service, including Asset Watch,
Maintenance Watch, and Health Watch
allow you to monitor and maintain your
equipment for the lowest operating cost.
Pin Grabber Plus Hydraulic Pin Grabber
Increases versatility of the excavator by
allowing the machine to pick up a wide
variety of work tools without leaving
the cab.
360° Scrap Shear
Caterpillar Scrap Shears feature 360°
rotation and high force-to-weight ratio.
Used for demolishing steel structures
and preparing bulk scrap (such as cars,
farm machinery and railroad cars) for
further processing.
11
Versatility
A wide variety of optional factory installed attachments are available to enhance
performance and improve job site management