Milton CAT 336D L - Manual (Page 10)

Heavy Duty Buckets. Heavy-duty
buckets are used for a wide range of
moderately abrasive applications such
as mixed dirt, clay and rock. HD buckets
have best loading and dumping
characteristics and will empty easier
in cohesive material. More robust
construction than the GP buckets.
General Purpose Capacity (GP-C)
Buckets. General purpose capacity
buckets are best for digging in soft to
hard ground with low to moderately
abrasive materials.
Heavy-Duty Power (HDP) Buckets.
Heavy-duty power buckets are for use
in moderately abrasive applications
where breakout force and cycle times
are critical. Maximizes tip force and
improves cycle times in most materials.
Heavy Duty Rock (HDR) Buckets.
Heavy-duty rock buckets are for use
in aggressive bucket loading in highly
abrasive application such as shot rock
and granite. HDR buckets include thicker
bottom wear plates and longer side wear
plates to extend the life of bucket in
these severe applications.
Caterpillar Ground Engaging Tools
(GET). All buckets in the DB/TB Family
utilize the Caterpillar K Series
® GET.
This GET system uses a vertical retainer
that is easier to remove and install than
the Cat J Series pin. The tip shapes
are more aggressive and offer better
penetration than the previous generation
of tips. There are also a variety of side
cutters and sidebar protectors to match
operating conditions.
Dedicated Quick Coupler.
Quick Couplers increase the versatility
of Cat excavators; allowing the ease
of changing work tools to meet job
requirements at hand in a matter of
minutes or seconds. Dedicated quick
coupler buckets have no loss of tip radius,
and develop maximum breakout force.
Hammer
Cat Hydraulic Hammers are precisely
matched to Cat machines for optimum
performance in a wide variety of
demolition and construction applications.
Thumb
Cat ® thumbs multiply the capabilities of
your excavator. This highly flexible tool
works in conjunction with the bucket to
transform an excavator into a highly
versatile material-handling machine.
Multi-processor
Multi-processors do the work of many
types of demolition tools by use of
interchangeable jaw sets. Changing jaws
allows a single unit to crush, pulverize
and perform a variety of specialized
cutting tasks, such as cutting steel rebar
and tanks.
10
Work Tools – Attachments
The 336D L has an extensive selection of work tools to optimize machine performance.