Milton CAT 416E - Manual (Page 12)

12
416E Backhoe Loader Specifications
Axle Ratings
Front Axle, 2WD,
Static 22 964 kg 50,582 lb
Dynamic 9186 kg 20,233 lb
Front Axle, 4WD,
Static 22 964 kg 50,582 lb
Dynamic 9186 kg 20,233 lb
Rear Axle, Static 22 964 kg 50,582 lb
Dynamic 9186 kg 20,233 lb
Axle Oscillation 10 Degrees
4WD and 2WD axles are pendulum mounted •
and permanently sealed and lubricated,
requiring no daily maintenance. Also features
double-acting steering cylinder with 52°
steering angle for increased maneuverability.
Engine Features
Three-ring pistons made of lightweight, •
silicon/aluminum alloy for strength and
maximum thermal conductivity.
Forged chrome/molybdenum-steel
•
crankshaft with salt bath nitrocarburized
pins and journals.
Front and rear crankshaft oil seals are “lip”
•
type Viton and PTFE designs featuring an
integral dust lip.
For durability, inlet valves are nitrided,
•
martensitic chrome silicon steel, while
exhaust valves are nitrided, austenitic
chrome manganese-nickel steel.
Cylinder block is high strength, cast iron
•
alloy of deep skirt, monobloc design for
increased strength and long life.
Cylinder head is high strength, cast iron
•
alloy construction with extra duty wall and
deck thickness. Intake and exhaust ports are
precision cast to promote optimum gas flow.
Direct injection fuel system provides
•
accurate fuel delivery and efficiency.
Dry-type axial seal air cleaner with integral
•
precleaner, automatic dust ejection system,
and filter condition indicator.
Direct electric, 12-volt starting and
•
charging system with 880 CCA Group 31
maintenance free battery.
Standard glow plug starting aid system
•
for efficient cold weather starting.
High contact ratio/gear train, peripheral
•
fixed isolation top cover and open deck
block design reduce bare engine noise.
Higher low end torque for better engine/
•
machine performance.
Tires
Choices listed as combination
of front/rear tires:
11L-16 (12 ply) F-3/19.5L-24 (12 ply) •
R4 ATU
12.5/80-18 NHS (12 ply) 1-3 Super
•
Traction/19.5L-24 (12 ply) R4 ATU
12.5/80-18 NHS (12 ply) 1-3 Super
•
Traction/21L-24 (16 ply) R4 ATU
340/80R 18 XMCL/500/70R 24 XMCL
•
340/80R 18 XMCL/19.5L-R24 (12 ply) •
R4 ATU
Brakes
Features:
Brakes meet the following standards: •
SAE J1473 and ISO 3450 requirements.
Self-adjusting, completely enclosed
•
and sealed.
Foot operated brake pedals can be
•
interlocked for roading.
Parking/secondary brakes are independent
•
of the service brake system. Parking brake is
mechanically applied through an adjustable
hand lever located on the right console.