VEGA VEGAFLEX 82 Profibus PA - Manual (Page 75)

75
11 Supplement
VEGAFLEX 82 • Profibus PA
44220-EN-130910
Ʋ Instrument weight (depending on
process fitting)
approx. 0.8 … 8 kg (0.176 … 17.64 lbs)
Ʋ Rod: ø 16 mm (0.63 in) approx. 1580 g/m (17 oz/ft)
Ʋ Cable: ø 4 mm (0.157 in) approx. 78 g/m (0.84 oz/ft)
Ʋ Cable: ø 6 mm (0.236 in) - PA coated approx. 180 g/m (1.9 oz/ft)
Ʋ Cable: ø 6 mm (0.236 in) approx. 80 g/m (0.86 oz/ft)
Ʋ Cable: ø 11 mm (0.433 in) - PA coated approx. 320 g/m (3.44 oz/ft)
Ʋ Gravity weight for cable ø 4 mm
(0.157 in) and cable: ø 6 mm
(0.236 in) - PA coated
325 g (11.46 oz)
Ʋ Gravity weight for cable ø 6 mm
(0.236 in) and cable: ø 11 mm
(0.433 in) - PA coated
780 g (27.51 oz)
Probe length L (from seal surface)
Ʋ Rod: ø 16 mm (0.63 in) up to 6 m (19.69 ft)
Ʋ Trimming accuracy - rod ±1 mm
Ʋ Cable: ø 4 mm (0.157 in) up to 75 m (246.1 ft)
Ʋ Cable: ø 6 mm (0.236 in) - PA coated up to 65 m (213.3 ft)
Ʋ Cable: ø 6 mm (0.236 in) up to 75 m (246.1 ft)
Ʋ Cable: ø 11 mm (0.433 in) - PA coated up to 65 m (213.3 ft)
Ʋ Trimming accuracy - cable ±0.05 %
Lateral load with rod: ø 16 mm (0.63 in) 30 Nm (22.13 lbf ft)
Max. tensile load
Ʋ Cable: ø 4 mm (0.157 in) 12 KN (2698 lbf)
Ʋ Cable: ø 6 mm (0.236 in) - PA coated 8 KN (1798 lbf)
Ʋ Cable: ø 6 mm (0.236 in) 30 KN (6744 lbf)
Ʋ Cable: ø 11 mm (0.433 in) - PA coated 30 KN (6744 lbf)
The tensile force of solids are subject of a normal fluctuation range. For this reason, the determined
diagram value of the following diagrams must be multiplied with safety factor 2.