VEGA VEGAFLEX 82 Profibus PA - Manual (Page 20)

20
4 Mounting
VEGAFLEX 82 • Profibus PA
44220-EN-130910
1
2
1
2
Fig. 11: Fasten the probe
1 Probe
2 Retaining sleeve
In case of difficult installation conditions in liquid applications, the
probe can be also mounted laterally. For this purpose, adapt the rod
with rod extensions or bow-shaped segments.
Let the probe length determine automatically by the instrument to
compensate the resulting running time changes.
The determine probe length can deviate from the actual probe length
when using bow-shaped segments.
If installations such as struts, ladders, etc. exist on the vessel wall,
then the probe should have a distance to the vessel wall of at least
300 mm (11.81 in).
You can find further information in the supplementary instructions of
the rod extension.
In case of difficult installation conditions, for example in a socket, the
probe can be adapted respectively with a rod extension.
Let the probe length determine automatically by the instrument to
compensate the resulting running time changes.
You can find further information in the supplementary instructions of
the rod extension.
Lateral installation
Rod extension