VEGA VEGAPULS 67 (≥ 2.0.0 - ≥ 4.0.0) Modbus and Levelmaster protocol - Manual (Page 21)

21
4 Mounting
VEGAPULS 67 • Modbus and Levelmaster protocol
41369-EN-121011
Fig. 18: Mounting on the vessel ceiling
Caution:
When mounting on the vessel ceiling mark sure that the sensor does
not overfill. Depending on the measured product, this can cause a
mechanical damage.
In a cylindrical silo with conical outlet, the mounting iis carried out
on a socket. It should be positioned on one third up to the half of the
vessel radius.
r
r r...
/ 1 3 / 1 2
Fig. 19: Mounting position and orientation
Large material heaps are best measured with several instruments,
which can be mounted on e.g. traverse cranes. For this type of ap-
plication it is advantageous to orient the sensor perpendicular to the
bulk solid surface.
The sensors do not influence each other.
Material heaps