Toshiba Pocket PC e800 - Manual (Page 167)

User’s Manual 11-12
Optional Functions
Making a Backup
Before performing the backup or restore operations, do the following;
■ Check that there is enough space in the main unit’s memory and on the
storage device. If the storage device does not have enough free space,
you cannot save the backup data. The backup data is saved as a file
named backup.dat on your storage device.
■ Make sure the main unit’s power is off when loading and unloading the
CF/SD card.
■ Save current data in the main unit’s memory before backing it up on the
storage device.
1. To make a backup to the CF/SD card, insert a CF Card or SD Card.
Make sure to do so in the proper direction.
2. Tap Start, Programs, and then DataBackup to display the DataBackup
screen shown below.
Data such as the password in Settings cannot be restored.
The data stored in the Flash ROM disk cannot be backed up.
Before backing up or restoring data, stop other applications, and connect
the AC adapter to the Toshiba Pocket PC e800.
If you make a backup to the CF/SD card or Flash ROM Disk using the
DataBackup Utility, please DO NOT: remove the CF/SD card, reset the
device, and/or turn off the device’s power until the backup is completed.
If you restore the data from the CF/SD card or Flash ROM Disk by
DataBackup Utility, please DO NOT: remove the CF/SD card, reset the
device, and/or turn off the device’s power until the restore is completed.
Failure to follow any of the above procedures may result in the loss of data.