Toshiba Pocket PC e800 - Manual (Page 139)

User’s Manual 10-5
Bluetooth
Advanced Settings
To change an advanced setting, select the desired setting and tap OK.
The default settings are as follows.
■ In the default setting for Home, the Security Mode is set to Non-secure
and, therefore, unspecified devices may be able to connect to Local
Device. It is recommended that you set the Security Mode to Security
On.
■ If you want to set the Connectability Mode to Non-connectable and you
are operating your Toshiba Pocket PC e800 in an environment in which
there are three or more operating Bluetooth devices, you should also
set the Discoverability Mode to Non-discoverable.
■ Tap the Options menu and Local Device.
The Device Information screen for Local Device appears.
To change the name of the device, enter the new name in the Device
Name box and tap OK.
■ The default device name is Toshiba BT.
■ The device name can be a maximum of 248 alphanumeric characters.
■ If the device name exceeds 248 alphanumeric characters, an error
message appears.
The Bluetooth environmental settings are now complete.
Refer to the following for additional operations.
■ COM service, see “ Using COM Service ” on page 10-9.
■ DUN/LAP service, see “ Using DUN/LAP Service ” on page 10-9.
■ PAN service, see “ Using PAN Service ” on page 10-10.
■ OPP service, see “ Using OPP Service ” on page 10-11.
■ FTP service, see “ Using FTP Service ” on page 10-15.
Discoverability
Mode Connectability
Mode Security Mode Encryption
Office Discoverable Connectable Security On Yes
Mobile Non-
discoverable Non-
connectable Security On Yes
Home Discoverable Connectable Non-secure No
Other Discoverable Connectable Security On Yes
If the Bluetooth icon no longer appears in the program menu, it can be
recovered by executing following program in Explorer:
\windows\bt_rescue.exe