Olympus IX2 RFAEVA2 User Manual
Page 3
IX2-RFAEVA-2
CONTENTS
This system employs a laser light source and should be assembled and adjusted by qualified
service personnel from Olympus.
Never attempt to assemble or adjust the system for it is extremely hazardous.
IMPORTANT
– Be sure to read this section for safe use of the equipment. –
1-7
CAUTION
1
MODULE NOMENCLATURE
8
2
CONTROLS
9, 10
3
TOTAL INTERNAL REFLECTION FLUORESCENCE OBSERVATION
11-14
3-1 Conditions of Observation ...................................................................................................................................................... 11
3-2 Preparation for Observation ................................................................................................................................................ 12
1
Preparing for Laser Beam Introduction
2
Introducing the Laser Beam
3-3 Observation Procedure .............................................................................................................................................................. 13
1
Adjusting the Focus
2
Adjusting the Laser Beam Incidence Angle
4
REFLECTED LIGHT FLUORESCENCE OBSERVATION
15
5
USING THE CONTROLS
15, 16
6
TROUBLESHOOTING GUIDE
17
7
SPECIFICATIONS
18
PROPER SELECTION OF THE POWER SUPPLY CORD ............................................................. 19, 20
1
Using the Binocular Tube Shutter
2
Using the Specimen Cover
3
Field Iris Aperture Diaphram
4
Filter Slider