VEGA Capacitive electrodes EK Profibus PA User Manual
Page 46
46
Capacitive electrodes EK - Profibus PA
Diagnostics
Display Diagnostics Instrument data
Configuration Services Quit Help
Status
Simulation
Under the menu item "Diagnostics", you can
choose the following functions:
• Status
• Simulation
Status
This function is not available.
Simulation
With this function, you can simulate a certain
level. Push the start button to activate the
simulation. Shift the scrollbar to the requested
PA output value or enter a specific PA output
value. The scaled display bar will be modified
accordingly. This will also influence the
display.
To interrupt the simulation, push the button
Stop.
The simulation will be stopped automatically if
you close the window
Simulation.
To check the outputs of the electrode and
connected instruments or components, you
have to click to
Diagnostics
, then to
Simula-
tion
.
Setup
Choose the requested measurement loop
and click to
OK
.
In the window "Display of measured value"
you can choose the unit in which the
measured value should be displayed. By
clicking to
Quit,
you return to the window
"VEGA Visual Operating".