VEGA Capacitive electrodes EK Profibus PA - Manual (Page 40)

40 Capacitive electrodes EK - Profibus PA
From the window "Instrument data parameter
adjustment", you can reach all submenus of
the sensor. Just test the various buttons one
after the other. You will always return to this
window. Click to the button
Adjustment to
carry out the adjustment.
There you find the following functions:
- Adjustment
- Conditioning
- Outputs
- Sensor optimization
- Additional functions
Setup
Options
In this function, program settings such as
backup, etc., are available.
Instrument data
Display Diagnostics Instrument data Configuration Services Quit Help
Parameter adjustment
Choose the measurement loop on which you
want to carry out the parameter adjustment
and click to
OK .
Adjustment - Min/Max adjustment
With this function, you can adjust the
electrode (Min./Max. adjustment). You can
choose if you want to carry out the
adjustment with or without medium.
In the windows "Min. adjustment" and
"Max.adjustment" (with medium) as well as
"Min/Max. adjustment" (without medium) there
is the option of entering an offset in
percentage, whereby the output value is
shifted by the entered percentage value. A
modification of this offset is normally not
necessary.
Under the menu item "Instrument data", you
can choose the function:
• Parameter adjustment.
Sensor parameter adjustment
Click to Instrument data , then to Parameter Parameter Parameter Parameter Parameter
adjustment adjustment adjustment adjustment adjustment.