Vutec SIK232 Interface - Instructions - Manual (Page 5)

5 / 13
2.3. Adding Hardwired Systems
When going from system ports other than system 1 on the R2D7, the connection may
go to either an “EYE” or an “AUX” port on the RP60.
2.4. Adding Wireless Systems
The R2D7 has the ability to control motors wirelessly using Radio Frequency (RF)
modules when in radio mode.
Plug the RFTM module into system 7 on the R2D7 using standard RP-Bus cable (see
figure 2.4.1).
For more detail on configuring the R2D7 for wireless systems, see section 4.1 “Radio
Mode.”
Figure 2.4.1: R2D7 Radio Mode Setup