VTech DS6641_-2 Manual - Manual (Page 67)

63
Answering system settings
Message alert tone
When the message alert tone is set to on, and there is at least one new message, the
telephone base beeps every 10 seconds. The message alert tone is preset to off.
There is no audible alert at the handset.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to Msg alert tone, then press SELECT.
Press or to select Tone: On or Tone: Off.
Press SELECT to save and you hear a confirmation tone.
The answering system must be turned on for message alert tone
to beep.
Message recording time
You can set the recording time allowed for each incoming message. The message
length is three minutes by default.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to Recording time, then press SELECT.
Press or to select 3 minutes, 2 minutes or 1 minute.
Press SELECT to save and you hear a confirmation tone.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Msg alert tone
ECO
Tone: Off
ECO
Recording time
ECO
3 minutes
ECO