Set date and time, Telephone settings – VTech DS6641_-2 Manual User Manual
Page 28
24
Telephone settings
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If you
subscribe to caller ID service, the day, month and time are set automatically with each
incoming call. However, the year must be correct so that the day of the week can be
calculated from the caller ID information.
To manually set the date and time:
Press
MENU
when the handset/telephone base is not in use.
Press or to scroll to
Set date/time, then press
SELECT
.
Press or to select the month then press
SELECT
, or use the
dialing keys to enter a two-digit number (
01-12).
Press or to select the date then press
SELECT
, or use the
dialing keys to enter a two-digit number (
01-31).
Press or to select the year then press
SELECT
, or use
the dialing keys to enter a two-digit number (
00-99) then
press
SELECT
.
Press or to select the hour then press
SELECT
, or use the
dialing keys to enter a two-digit number (
01-12).
Press or to select the minute then press
SELECT
, or use the
dialing keys to enter a two-digit number (
00-59).
Press or to select
AM or PM.
Press
SELECT
to save the settings and return to the previous menu. You hear a
confirmation tone.
If the date and time are not set when a message is recorded, the system announces,
“
Time and date not set,” before each message plays.
The telephone plays two beeps if you enter an invalid number.
1.
2.
3.
4.
5.
6.
7.
8.
9.
•
•
Date: MM/DD/YY
ECO
Set date/time
ECO
Time: HH:MM -
-
ECO