VTech DS6641_-2 Manual - Manual (Page 43)

Telephone operation
39
Transfer a call
While on an outside call, you can transfer the call from one system device to another.
To transfer a call on a cordless handset:
During a call, press MENU.
Press or to scroll to Transfer, then press SELECT.
When you have more than one handset, your handset shows
Transfer to: Press 7 for the telephone base or 1-5 for
HANDSET 1 to HANDSET 5.
The outside call is put on hold and your handset shows
Transferring, and then Transferred. The destination device The destination device
rings and shows Incoming call.
To answer the call on the destination handset, press /HOME,
/CELL, or any dialing key (0-9, TONE or QUIET
#
).
-OR-
To answer the call on the telephone base, lift the corded handset,
or press /HOME, /CELL or any dialing key (0-9, TONE or QUIET
#
).
To transfer a call at the telephone base:
During a call, press MENU.
When you have one handset, the screen displays Transfer call?
Press SELECT.
When you have more than one handset, the telephone base shows Transfer to:
Press 1-5 for HANDSET 1 to HANDSET 5.
The outside call is put on hold and your telephone base shows Transferring, and
then Transferred. The destination handset rings and shows The destination handset rings and shows Incoming call.
To answer the call on the destination handset, press /HOME, /CELL or any
dialing key ( 0 - 9 , TONE or QUIET
#
).
If the destination device does not answer the call within 30 seconds, the call will
be reverted to the originating device. If the originating device does not answer the
reverted call within 30 seconds, the call ends.
If the destination device is in the directory or caller ID log, or is out of range, the
originating device displays Unable to call and then reconnects to the outside call.
1.
2.
•
3.
1.
•
•
2.
•
•
Transfer
ECO
Transfer to:
ECO