Toshiba Pocket PC e400 - Manual (Page 90)

User’s Manual 8-12
Optional Functions
7. When finished, tap OK. The progress bar is displayed during the
backup process. When the backup is completed, the backup finish
message appears. The backup time that is displayed on screen is the
time that the backup was started.
8. Tap OK to return to the previous screen.
9. Tap Exit to close the DataBackup screen.
Carrying Out the Restore Operation
To restore is to overwrite the backed up data from the storage device onto
the main memory of your Toshiba Pocket PC e400. Prior to restoring your
data, please consider the following:
■ If the same file name exists in the main memory of your Toshiba Pocket
PC e400, this file data is replaced with the backup data from the storage
device.
■ If files exist in the main memory but not in the backup file, they will not
be overwritten.
1. To restore from the SD card, insert the SD card that contains the
backup data into your Toshiba Pocket PC e400.
2. Tap Start, Programs, and then DataBackup to display the DataBackup
screen shown on the following page .
If storage device does not have enough free space, the backup process
will not start. Before starting the backup, check the remaining storage
device capacity.
If the storage card is write-protected, you cannot save the backup data.
Cancel the write-protection before starting the backup.
Backups can also be made periodically. For more information, see "Making
an Auto Backup", later in this chapter.
Backup files are always overwritten.