Toshiba Pocket PC e400 - Manual (Page 113)

User’s Manual A-3
Additional Information
Following message is
displayed. "NOT
ENOUGH BATTERY
POWER. USB devices
cannot be used.
Because PDA's battery
power is low"
The battery power is too
low to use USB
devices.
Charge the battery or
connect AC adapter.
Following message is
displayed. "TOO MUCH
USB
CONNECTION.
Connecting USB
devices are too much."
The total power
consumption of
connected USB devices
is too large.
This USB port supports
total 500 mA USB
device. Confirm
connected USB device.
Following message is
displayed. "USB OVER
CURRENT DETECT
USB device is turned
off. Please disconnect
USB device."
The total power
consumption of
connected USB devices
is too large.
This USB port supports
total 500 mA USB
device. Confirm
connected USB device.
To enable USB port
again, turn off the
power of Pocket PC or
push the reset button.
Symptom Cause Correction