Velleman projects K8028 Assembly instructions - Manual (Page 2)

2
Specifications:
 Microprocessor technology.
 13 operating modes including toggle switch, dimmer, staircase timer, slow-on / slow-off dimmer, timer, etc…
 Suited for both resistive and inductive loads: (Incandecent lightbulbs, halogen lighting, low voltage halogen
lighting with wirewound transformers, …)
 “Soft start”-function stretches bulb life.
 Auto shutdown-function switches off the unit when a load error is detected (e.g. too inductive or no load).
 Push button control allows parallelling of buttons to enable control from several remote locations.
 Two delay timers with learn mode (5s – 2h).
 No memory loss in case of power failure.
 On board fuse and mode selection push button.
 LED status indication (mode,error, dim status,...)
Features:
 AC power: 110-125 to 220-240VAC, 50/60Hz.
 Auto netfrequency detection (50/60Hz.)
 Max. load: 2,5A (300W / 120V - 600W / 230V)
 Dimensions: 100x82x36mm (4”x3.3”x1,4”)
Features & Specifications

Attention: This unit is not suited for electronic transformers.
H8028IP'2-rev3.pub
page 2 Monday, August 27, 2012 10:04