Velleman projects K8028 Assembly instructions User Manual
Page 13
13
The various functions are discussed in detail here. For each function it states how the module is controlled:
either by one or more parallel switched pushbuttons or by a make contact originating from a single pole
switch or a switch output of a time clock. These are connected to the “INPUT” connector.
Function 1: On/Off switch:
One short press on the pushbutton switches the lighting on, the next press switches it off again....
(=teleruptor connection).
Control: One or more parallel switched pushbuttons.
Application: A lighting point to serve a number of places.
Function 2: Pushbutton dimmer with memory:
One short press on the pushbutton switches the lighting between “OFF” and the last set light intensity.
Keep the pushbutton pressed in (longer than 1.5 sec.) then the light intensity can be adjusted. At the end
point of the light intensity the adjustment stops, which allows you to precisely set the min. and max. light
intensity.
Control: One or more parallel switched pushbuttons.
Application: General lighting control, without delay times.
Selections
21. Details of selections :
H8028IP'2-rev3.pub
page 13
Monday, August 27, 2012 10:04