Spicer 326837 - Manual (Page 7)

06SE01TBC6298 7
6. For ES-165 5/6/7/8D, L, F, ES-150-4D, ES-150-8D, F & 6D
only:
Assemble roller retainer on ends of roller as shown in Figure 12.
7. Using a lever or large screwdriver, stretch shoe return
spring to allow insertion of new pin and roller, (or roller
and retainer assembly) on the lower shoe web. Refer to
Figure 13.
NOTE: If drums are oversized, use oversize rollers, see Inspection-
Drum Inspection.
8. For ES-165 5/6/7/8D, L, F, ES-150-4D, ES-150-8D, F &
6D only:
Position assembly in roller recess as shown. Squeeze loops and
swing retainer into position to snap loops into web holes. Refer to
Figure 14. Verify that both retainer loops are engaged in web holes
before proceeding.
9. Repeat process on upper shoe.
NOTE: For all EB Models a roller retainer is not used.
Install Retainer
on Roller
Figure 12
Stretch
Return Spring,
Install Roller
And Retainer
Figure 13
Web
Hole
Install Retainer
Loops in Shoe
Web Holes
Figure 14