Spicer 326837 - Manual (Page 5)

06SE01TBC6298 5
6. Push cam end of both shoes toward cam and unhook shoe
return spring. Remove and discard spring.
NOTE: To remove return spring, position a lever or suitable tool
with notch to engage spring rod. Refer to Figure 7. Apply downward
force to stretch spring, allowing removal of upper spring hook.
Remove and discard spring.
NOTE: ES-165-5,6,7L,D/ES-150-6D steer axle brakes may use two
return springs with a horse collar or dual spring post. To remove
return springs, position a lever or suitable tool with notch to engage
spring. Return to Figure 7. Apply downward force to stretch upper
spring, allowing removal of upper spring hook. Remove and
discard. Repeat procedure for lower spring.
7. Rotate both shoes around anchor pin and remove from
vehicle. Refer to Figure 8.
8. Clean and inspect remaining parts as outlined in removal/
disassembly section of this manual.
Stretch Using Suitable
Tool Positioned
As Shown
Figure 7
Rotate Both Shoes
Around Anchor
Pin and Lift Off
Brake Shoes
Figure 8
Figure 9