Spicer 326837 - Manual (Page 4)

06SE01TBC6298 4
Brake Shoe Removal
EB models (except EB-150-4L)/ ES-165-5D,L / ES-165-6D,L /
ES-165-7D, F, L / ES-150-8D, F / ES-150-4D / ES-150-6D /
ES-165-8D, F, L
1. Perform steps in Removal/Disassembly: Drum Removal.
2. ES-165-5,6,7,8,D,L,F, ES-150-4D, ES-150-8D, F & 6D
ONLY: Pry roller retainer coiled loops out of both shoe web
holes as shown in Figure 5. Pivot roller retainer to swing
loops clear of shoe webs.
NOTE: EB models do not have roller retainers.
3. Using a large screwdriver or lever, lift upper shoe to stretch
return spring as shown in Figure 6.
4. Remove upper cam roller and pin.
NOTE: ES-165-5,6,7,8D, L, F, ES-150-4D, ES-150-8D, F & 6D
ONLY: Remove roller and roller retainer as a unit.
5. Repeat Steps 2 through 4 to remove lower shoe roller and
pin.
NOTE: Dana recommends the use of a suitable brake tool when
removing rollers and return springs.
!
WARNING: The long term effects of non-asbestos fibers
have not been determined. Therefore, precautions should
be used when handling these materials.
See General Information / Lining Material Warning
Shoe
Web
Roller
Retainer
Disengage
Retainer Coiled
Loops From
Shoe Webs
Pivot Retainer to
Swing Loops Clear
of Shoe Web
Figure 5
Remove Roller and Pin, Then
Repeat for Lower Shoe.
For ES Brakes, See Note Below
Lift Upper Shoe
to Stretch Spring
Figure 6