QNAP VS-2004L en - Manual (Page 76)

76
Camera Status
The camera status is indicated by the icons shown below:
Icon Camera Status
Scheduled or continuous recording is in process
This IP camera supports audio function
This IP camera supports PT function
Manual recording is enabled
The recording triggered by advanced event management (‘Camera
Settings’ > ‘Alarm Settings’ > ‘Advanced Mode’) is in process
The alarm input 1 of the IP camera has been triggered
The alarm input 2 of the IP camera has been triggered
The alarm input 3 of the IP camera has been triggered
A moving object has been detected
Digital zoom is enabled
Connection Message
When the NVR fails to display the video of an IP camera, a message will be shown in the
channel window to indicate the status.
Message Description
Connecting If the IP camera is located on a remote network or the Internet, it may
take some time to establish the connection to the camera.
Disconnected The NVR cannot connect to the IP camera. Please check the network
connection of the computer and the availability of the IP camera. If the
IP camera is located on the Internet, open the port on the router or
gateway.
No Permission No access right to view the monitoring channel. Please login as an
authorized user or contact the system administrator.
Server Error Please check the camera settings or update the firmware of the IP
camera (if any). Contact the technical support if the error persists.