Power-Sonic F Series Transformer Type Battery Chargers User Manual
A&f series transformer type battery chargers, Specifications features operating characteristics, For sla batteries

We’ve Got The Power.
™
Specifications
Features
Operating Characteristics
Model
Nominal
Voltage
Output Voltage
Float/Fast
Output
Current (mA)
Type
Dimensions: in. (mm)
Weight
lbs. (kg)
Length
Width
Height
PSC-6250F
6
6.83 / NA
400
Fixed volt float
2.20 (56)
1.96 (50)
1.88 (48)
0.50 (0.23)
PSC-6250A
6
6.75 / 7.35
400
Dual Rate
2.20 (56)
1.96 (50)
1.88 (48)
0.50 (0.23)
PSC-6300A
6
6.84 / 7.35
300
Dual Rate
2.75 (69)
2.75 (70)
3.75 (95)
1.36 (0.62)
PSC-61000A
6
6.84 / 7.35
1000
Dual Rate
2.75 (70)
2.75 (70)
3.75 (95)
1.36 (0.62)
PSC-12800A
12
13.68 / 14.70
800
Dual Rate
2.75 (69)
2.75 (70)
3.75 (95)
1.36 (0.62)
PSC-122000A
12
13.50 / 14.70
2000
Dual Rate
5.55 (141)
3.60 (91)
2.89 (73)
3.80 (1.73)
PSC-124000A
12
13.50 / 14.70
4000
Dual Rate
6.65 (169)
5.30 (135)
3.40 (86)
7.40 (3.36)
PSC-124000AP
12
13.50 / 14.70
2,500/2,200
Charger/Pwr. Supply
6.65 (169)
5.30 (135)
3.40 (86)
7.40 (3.36)
Electronically regulated - current limited chargers for
sealed lead-acid type batteries.
Wall mount plug-in design for 250, 300, 500, 800 series
and 61000A; counter top design for 241000A, 2000, 4000
and 10A series.
Operating temperature range: 32ºF - 104ºF (0ºC - 40ºC).
Input voltage: 110/120 VAC, 60Hz. 122000A and 241000A
can be switched to accept 220/230 VAC, 50Hz.
LED’s: For 250A & 500A series: “POWER ON” and
“CHARGING MODE” (ON=high-rate charging, OFF=float
charging). For 300, 800, 1000, & 10A series: “FLOAT” and
“FAST CHARGE” indicators. For 2000A, 241000A and 4000
series: single tri-color indicator.
Hi-impact resistant thermo-plastic housing for 250,
300, 500, and 800 series; metal housing for 1000, 2000,
4000, and 10A series.
Screw-type terminals for 250 & 500 series, I/O cord with
battery connectors for 300, 800, 1000, 2000, 4000 and
10A series chargers.
“A” Series: Automatic dual rate chargers sense battery
requirements and automatically switch from the fast charge
to float mode, or vice versa. LED’s provide visual indication
of the charging mode. Automatic chargers combine the
advantages of float and cycle chargers; recharge time is
short yet batteries are safe from being overcharged. This
charger is ideal for cyclic applications where recharge time
is critical and the battery may be left on charge indefinitely.
As a result charging is fool-proof.
“F” Series: Float chargers are designed to provide optimum
life for batteries used in standby applications where
charging is continuous. The chargers deliver a constant
voltage of 2.25 to 2.30 volts per cell which allow the battery
to seek its own current level and maintain itself in a fully
charged condition. This series is best suited for burglar
and fire alarm equipment, emergency lighting, memory
protection, or UPS systems where the battery serves as
back-up power to the AC source.
A&F Series Transformer Type Battery Chargers
FOR SLA BATTERIES