Ohaus DEFENDER 5000 BENCH SCALES Manual en - Manual (Page 47)

EN-45 5000 Series Indicators
Establishing a New APW
Press the No button to increment the sample size. Choices are 5, 10, 20, 50 and 100.
To establish the APW, place the specified quantity of samples on the scale and press the FUNCTION Mode
button to capture the weight.
APW is displayed shortly followed by the APW value with the current unit of measure.
Begin Counting
Place the parts on the scale and read the count. If a container is used, be sure to tare the empty container
first.
4.8.3 Percent Weighing
Use this mode to measure the weight of a sample as a percentage of a reference weight.
Reference Weight (Ref Wt)
When the FUNCTION Mode button is released, CLr.rEF% is displayed.
Clearing a Stored Reference Weight
Press the
Yes button to clear the stored reference weight.
Recalling a Stored Reference Weight
Press the
No button to recall the existing reference weight.
NOTE: Press the FUNCTION Mode button to temporarily display the reference weight.
Establishing a New Reference Weight
The display shows Put.rEF %.
To establish the Ref Wt, place the sample on the scale and press the FUNCTION Mode button to capture the
weight. rEF.Wt is displayed shortly followed by the REF Wt value with the current unit of measure.
Begin Percent Weighing
Place the sample on the scale, and read the percent value. If a container is used, be sure to tare the empty
container first.

