Ohaus DEFENDER 5000 BENCH SCALES Manual en - Manual (Page 38)

EN-36 5000 Series Indicators
3.10.2 Baud
Set the Baud rate.
300 = 300 bps
600 = 600 bps
1200 =1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200
= 19200 bps
3.10.3 Parity
Set the data bits and parity.
7 EVEN = 7 data bits, even parity.
7 Odd = 7 data bits, odd parity.
7 NONE = 7 data bits, no parity.
8 NONE = 8 data bits, no parity.
3.10.4 Stop Bit
Set the number of stop bits.
1 = 1 stop bit.
2 = 2 stop bits.
3.10.5 Handshake
Set the flow control method.
NONE = no handshaking.
ON-OFF = XON/XOFF software handshaking.
HArd = hardware handshaking.
3.10.6 Address
Set the communication address.
NOTE: Address is only displayed in the COM2 menu if the RS422/RS485 option is installed.
OFF = no address.
01 to 99 = address 01 to 99
•
•
•
3.10.1 Reset
Set the COM1 and COM2 menu to factory defaults.
NO = not reset.
YES = reset.