Ohaus DEFENDER 3000 METAL WEIGHING INDICATOR Manual en - Manual (Page 29)

EN-27 3000 Series Indicators
3.9 Lock Menu
Use this menu to prevent unauthorized changes to menu settings. Default
settings are bold.
Reset No, Yes
Lock Calibration Menu Off, On
Lock Setup Menu
Off, On
Lock Readout Menu Off, On
Lock Mode Menu
Off, On
Lock Unit Menu Off, On
Lock Print Menu Off, On
End Lock Menu Exit LOCK Menu
3.9.1 Reset
Set the menu Lock menu to factory defaults.
NO
= not reset.
YES = reset.
3.9.2 Lock Calibration
Set the status.
OFF = Calibration menu is not locked.
ON = Calibration menu is locked and hidden.
3.9.3 Lock Setup
Set the status.
OFF = Setup menu is not locked.
ON = Setup menu is locked and hidden.
3.9.4 Lock Readout
Set the status.
OFF = Readout menu is not locked.
ON = Readout menu is locked and hidden.
3.9.5 Lock Mode
Set the status.
OFF
= Mode menu is not locked.
ON = Mode menu is locked and hidden.
3.9.6 Lock Unit
Set the status.
OFF = Unit menu is not locked.
ON
= Unit menu is locked and hidden.