Ohaus DEFENDER 3000 METAL WEIGHING INDICATOR Manual en - Manual (Page 22)

EN-20 3000 Series Indicators
3.4.7 Zero Range
Set the percentage of scale capacity that may be zeroed.
0-2 = zero up to 2 percent of capacity
0-100 = zero up to full capacity
•
•
•
3.4.6 Power On Unit
Set the unit of measure displayed at startup.
Auto = last unit in use when the indicator was turned off.
Unit kg = kilograms
Unit lb = pounds
Unit g
= grams
Unit oz = ounces
3.4.9 End Setup
Advance to the next menu.
3.4.8 Retain Zero Data
Set the retain zero data status.
OFF = disabled
ON = when power is turned on, the displayed weight is based on the last
stored zero.
3.4.5 Graduation
Set the scale readability.
0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20.
NOTE: Not all settings are available for each capacity. Refer to the Setup Table 3.3 for available settings.