beautypg.com

Ohaus DEFENDER 3000 METAL WEIGHING INDICATOR Manual en User Manual

Page 18

background image

EN-16

3000 Series Indicators

3.3.3 Geographical Adjustment Factor

The Geographcial Adjustment Factor (GEO) is used to compensate for variations in gravity.

Settings from 0 to 31 are available. Refer to table 3-2 to determine the GEO factor that corresponds
to your location.

Note: Changing the GEO Factor alters the calibration. The GEO value was set at the factory and should only
be changed by an authorized manufacturer’s representative or certified verirication personnel.

Advance to the next menu.

3.3.4 End Calibration