Ohaus DEFENDER 3000 METAL WEIGHING INDICATOR Manual en - Manual (Page 25)

EN-23 3000 Series Indicators
3.6.2 Parts Counting Mode
Set the status.
OFF = Disabled
ON
= Enabled
3.6.6 End Mode
Advance to the next menu.
3.6.3 Display-Hold Mode
Set the status.
OFF = Disabled
ON
= Enabled
3.6.4 Checkweigh Mode
Set the status.
OFF = Disabled
ON
= Enabled
3.6.5 Totalize Mode
Set the status.
OFF = Disabled
ON
= Enabled
3.6 Mode Menu
Enter this menu to activate the desired application modes.
Reset No, Yes
Count Off, On
Hold Off, On
Check Off, On
Totalize Off, On
End Mode Exit MODE menu
3.6.1 Reset
Set the Mode menu to the factory defaults.
No
= not reset.
Yes = reset.