Ohaus DEFENDER 3000 METAL WEIGHING INDICATOR Manual en - Manual (Page 20)

EN-18 3000 Series Indicators
Reset No, Yes
Legal for Trade
Off, On
Calibration Unit kg, lb
Capacity
5…20000
Graduation 0.0005…20
Power On Unit Auto, kg, lb, g, oz
Zero Range 2%, 100%
Retain Zero Data Off, On
End Setup Exit SETUP menu
3.4 Setup Menu
When the Indicator is used for the first time, enter this menu to set the
Capacity and Graduation.
3.4.1 Reset
Reset the Setup menu to the factory defaults.
No
= not reset.
Yes = reset.
3.4.4 Capacity
Set the scale capacity from 5 to 20000. Refer to the Setup Table 3.3 for available settings.
3.4.2 Legal for Trade
Set the legal for trade status.
OFF = off
ON = on
Turning on the “LFT” menu setting has the following effects:
• Zero-range is set and locked on “2”.
• Auto Zero Tracking is set and locked on 0.5d
• The lb:oz unit is not available as a power-on setting.
3.4.3 Calibration Unit
Set the unit during calibration.
CAL UN kg = Calibrate using kg weights
CAL UN lb = Calibrate using pound weights