High Lifter Lift Kit for Can-Am 1000 Outlander and Renegade 1000 - Signature Series - Manual (Page 4)

4
6) You will need to relocate the vent tube that is connected the front differential. It will interfere with the
bracket and how it mounts. The vent tube is located on the left side of the ATV.
7) Disconnect it from the differential, cut the zip ties holding it in place, and pull it up through the hole near
where the shock mounts to the frame.
8) Relocate it to the back side of the frame opposite from where it was running and reconnect it to the
differential and secure the line with the zip ties provided.
9) Once you have relocated the vent tube, connect the long bracket to the frame.
10) Using a 10x65mm hex bolt and the front medium spacer connect the bracket to the frame.