High Lifter Lift Kit for Kawasaki 750 Teryx 4-Seater - Signature Series - Manual (Page 7)

7
9) Drill the holes on the marked areas. We used the bracket as a guide.
10) Once you have drilled the holes leave the bottom of the shock attached to the bracket, but remove the
spacer and 12x80mm bolt you have between the shock mount tabs.
11) Now to attach the bottom of the lift bracket to the control arm by placing a rear spacer between the
holes you drilled. Connect the bracket using a 12x80mm bolt and 12mm lock nut.
12) Now reinsert the rear spacer between the shock mount tabs and connect it using a 12x80mm bolt and
12mm lock nut.